【iPhone神アプリ】SignalScopeの評価・評判、口コミ
SignalScope turns your iOS device into a powerful real-time spectrum analyzer and oscilloscope. Easily measure audible frequencies in SignalScope’s FFT analyzer. “Touch” your data with highly interactive, multi-touch enabled analyzer displays. See http://youtube.com/faberast for video demos.
Input signals can be acquired from the built-in accelerometer, or from the current audio input path.
For more information regarding compatible audio hardware, visit http://blog.FaberAcoustical.com.
Features:
- Analyze signals coming from the iOS device’s current audio input source, or from the built-in accelerometer.
- Assign input channel units and sensitivities for individual USB Audio devices. Direct support is included for the Digiducer 333D01 accelerometer and miniDSP UMIK-1 measurement microphone.
- Manually switch between available audio input sources.
- Load microphone frequency response data (FRD) and apply frequency response correction (FRC) to FFT spectrum measurements.
- Audio input is typically sampled at 48 kHz or 44.1 kHz (higher and lower sample rates are possible, even up to 192 kHz, with hardware that supports it). Built-in accelerometer data is sampled at roughly 100 Hz.
- Zoom in or out on spectrum and waveform displays with two-finger expand/pinch gestures, even while the analyzer is running.
- Pan vertically or horizontally in zoomed displays with two-finger scrolling.
- Pinpoint individual sample values or frequencies with a cursor.
- Save high-resolution spectrum or waveform display images as PDF files or as JPEG images in the iPhone's Camera Roll photo album.
SignalScope supports full and partial upgrades to the additional tools and functionality offered in SignalScope Pro. Upgrades may be purchased via in-app purchase.
Available in-app purchase upgrades include:
- Full upgrade to the functionality of SignalScope Pro.
- Signal Generator tool (not the same as SignalSuite).
- - Random and periodic pseudorandom noise (period defined by FFT length)
- - White and pink noise weighting
- - Lin and log frequency sweeps
- - Tone generator
- Octave and 1/3-octave Analyzer tool (RTA).
- - Whole and 1/3-octave RTA (based on digital Butterworth bandpass filters)Fast, Slow, and Impulse response times
- - Flat, A, and C frequency weighting
- - Equivalent and time-weighted exponential average levels
- - Max, peak, and elapsed time also captured
- Level Meter tool.
- - Flat, A, and C frequency weighting
- - Equivalent and time-weighted exponential average levels
- - Max, peak, and elapsed time also captured
- Data acquisition (CSV, TXT and MAT file data capture) with downloading to Mac or PC via a standard web browser or iTunes File Sharing. Includes support for additional engineering units (V, A, m/s^2, m/s, g, ips), which are assignable to audio input channels.
Input signals can be acquired from the built-in accelerometer, or from the current audio input path.
For more information regarding compatible audio hardware, visit http://blog.FaberAcoustical.com.
Features:
- Analyze signals coming from the iOS device’s current audio input source, or from the built-in accelerometer.
- Assign input channel units and sensitivities for individual USB Audio devices. Direct support is included for the Digiducer 333D01 accelerometer and miniDSP UMIK-1 measurement microphone.
- Manually switch between available audio input sources.
- Load microphone frequency response data (FRD) and apply frequency response correction (FRC) to FFT spectrum measurements.
- Audio input is typically sampled at 48 kHz or 44.1 kHz (higher and lower sample rates are possible, even up to 192 kHz, with hardware that supports it). Built-in accelerometer data is sampled at roughly 100 Hz.
- Zoom in or out on spectrum and waveform displays with two-finger expand/pinch gestures, even while the analyzer is running.
- Pan vertically or horizontally in zoomed displays with two-finger scrolling.
- Pinpoint individual sample values or frequencies with a cursor.
- Save high-resolution spectrum or waveform display images as PDF files or as JPEG images in the iPhone's Camera Roll photo album.
SignalScope supports full and partial upgrades to the additional tools and functionality offered in SignalScope Pro. Upgrades may be purchased via in-app purchase.
Available in-app purchase upgrades include:
- Full upgrade to the functionality of SignalScope Pro.
- Signal Generator tool (not the same as SignalSuite).
- - Random and periodic pseudorandom noise (period defined by FFT length)
- - White and pink noise weighting
- - Lin and log frequency sweeps
- - Tone generator
- Octave and 1/3-octave Analyzer tool (RTA).
- - Whole and 1/3-octave RTA (based on digital Butterworth bandpass filters)Fast, Slow, and Impulse response times
- - Flat, A, and C frequency weighting
- - Equivalent and time-weighted exponential average levels
- - Max, peak, and elapsed time also captured
- Level Meter tool.
- - Flat, A, and C frequency weighting
- - Equivalent and time-weighted exponential average levels
- - Max, peak, and elapsed time also captured
- Data acquisition (CSV, TXT and MAT file data capture) with downloading to Mac or PC via a standard web browser or iTunes File Sharing. Includes support for additional engineering units (V, A, m/s^2, m/s, g, ips), which are assignable to audio input channels.
ランキングチャート
このアプリは最近ランキングに入っていません
SignalScopeのレビューや評価・評判、口コミまとめ
- 神アプリ認定！
- うーん…。
レビュー募集中！！SignalScopeを使って分かったことを書いてみよう！