【iPhone神アプリ】SleepOverの評価・評判、口コミ
SleepOver is a wake-on-LAN (WOL) utility for the iPhone and iPod touch, allowing you to remotely wake up a sleeping computer.
Wake-on-LAN works by sending a "magic" network packet to a sleeping computer. If the destination computer supports wake-on-LAN it can listen for these "magic" packets while it is sleeping and wake up automatically if it receives one.
FEATURES:
- Wake a pre-defined host by simply tapping it on the main screen.
- Define as many hosts as you need.
- Configure up to 2 network interfaces for each host, allowing you to wake hosts over a LAN and the Internet.
- Support for hostnames (useful for DynamicDNS).
REQUIREMENTS:
- Target hosts must support wake-on-LAN.
- Target hosts must have wired network connections (it is not possible to wake a wireless computer).
- Wake-on-LAN requires iPhone or iPod touch to have an active Wi-Fi connection.
- Wake-over-Internet requires iPhone or iPod touch to have an active Internet connection (cellular or Wi-Fi).
- Wake-over-Internet will only work if the "magic" packet can reach its destination. Your router must be configured to allow incoming UDP packets on a chosen port to be broadcast over the LAN. Many consumer routers do *not* allow this, therefore please verify your network configuration using an on-line wake-over-Internet service before purchasing SleepOver if wake-over-Internet is important to you.
Please send any feature requests to Percula Software either by email from the About screen in SleepOver or by using the feedback form on our website.
Wake-on-LAN works by sending a "magic" network packet to a sleeping computer. If the destination computer supports wake-on-LAN it can listen for these "magic" packets while it is sleeping and wake up automatically if it receives one.
FEATURES:
- Wake a pre-defined host by simply tapping it on the main screen.
- Define as many hosts as you need.
- Configure up to 2 network interfaces for each host, allowing you to wake hosts over a LAN and the Internet.
- Support for hostnames (useful for DynamicDNS).
REQUIREMENTS:
- Target hosts must support wake-on-LAN.
- Target hosts must have wired network connections (it is not possible to wake a wireless computer).
- Wake-on-LAN requires iPhone or iPod touch to have an active Wi-Fi connection.
- Wake-over-Internet requires iPhone or iPod touch to have an active Internet connection (cellular or Wi-Fi).
- Wake-over-Internet will only work if the "magic" packet can reach its destination. Your router must be configured to allow incoming UDP packets on a chosen port to be broadcast over the LAN. Many consumer routers do *not* allow this, therefore please verify your network configuration using an on-line wake-over-Internet service before purchasing SleepOver if wake-over-Internet is important to you.
Please send any feature requests to Percula Software either by email from the About screen in SleepOver or by using the feedback form on our website.
ランキングチャート
このアプリは最近ランキングに入っていません
SleepOverのレビューや評価・評判、口コミまとめ
- 神アプリ認定！
- うーん…。
3Gでもヾ(＠⌒ー⌒＠)ノ
- 4.0
- uehonmachi 2014年04月24日
ipをなんど打ち込んでも遠隔起動出来なかったけど、DDNSでドメイン設定したら自宅から会社のPCを3Gから起動出来ました。
まずは使用機器がWOL対応かどうかご確認を
- 4.0
- Katsuyuky 2014年04月24日
スリープ中のMac or PCに対して、iPhoneを使ってネットワーク経由でスリープから目覚めさせる為のアプリですが、 ローカルネットワーク内であれば設定もそれほど面倒でもなく、対象のMACアドレス、IPアドレス設定程度で終わります。 ただ、これをWAN（インターネット）経由で行う場合、ルーターにWOL対応の製品が必要となります。 国内で販売されてるルーターでWOL対応の製品はごく限られた物しかありませんので、WAN越しのWOL使用を お考えの方は、ご使用中のルーターがWOL対応の製品かどうか事前に確認してください。 あと、PCの場合はNICがWOL非対応の場合もあり、またBIOSレベルでWOLの設定が必要な場合もありますのでご注意を。
Remote使う人ならこれも！！
- 5.0
- ForgeNewLife 2014年04月24日
Remoteに欲しかった機能の一つ、Macのスリープ解除がこれなら簡単に出来ます。MacのiTunesは起動したままで使えば、Mocha VNC Lite使ってわざわざiTunesも起動する必要もなし！！VNCを使って画面共有される方も、これでスリープ解除できるから買いかと思います。